Camera Status - TomTom BANDIT Reference Manual

Photo
Video
Slow Mo
Timelapse
Cinematic

Camera status

FOR REVIEWERS: What about certification info? as per below for the Fitness watch?
To see certification information on your watch, move down from the clock screen to open the
Settings menu.
Select Standards and then move right to scroll through the certification information.
-------------------------------------------------------------------------------------
From the Camera Status screen, move down to open the SETTINGS screen. Select STATUS then
move right.
The status screen shows the following information:
Battery - the battery power left on your camera.

Photo mode has the following options:
Single - For taking a single photograph.

 Burst - For taking a series of photos in a very short time.
 Continuous - For taking a series of photos at a pre-set interval. This is
also called photo logging.
Normal high-quality video
720p, and the frame rate to 30 fps or 60 fps.
*** ADD LINKS TO GLOSSARY HERE for 1080p etc ****
In SLOW MO or slow motion mode, the camera records at a multiple of the
normal frame rate (2x, 4x, 8x), but stores the video with the normal
frame rate (30 fps) for playback, which results in slow motion video.
Audio and sensor data are also recorded in the slow motion mode. The
available slow motion rate depends on the video resolution you choose.
When in TIMELAPSE MODE, the camera records a time-lapse video directly
as a video recording at the currently set resolution and at the normal
frame rate.
You can choose the interval between recording. Time-lapse recording
stops when the battery level is low, when the memory card is full or when
you press the STOP button.
No audio is recorded during a time-lapse video, but sensor information is
recorded.
CINEMATIC is the highest resolution mode, capturing video at 4K or 2.7K.
For normal use, you should find that 1080p offers sufficiently high quality
video.
mode. You can set the video quality to 1080p or
Charge the battery stick
19
if the power is low.