Table of Contents
Advertisement
User's Manual
2. Connect the D-sub 9-pin RS232 connector end of the PS/2 to RS232 cable provided with the optional touch
screen package to the 9-pin RS232 serial port at the back of your PC.
3. Install the Touch Screen Drivers to your PC.
4. Following the Touch Screen driver guide to align your touch screen positioning.
Power Management System
The LCD Monitor complies with the VESA DPMS (version 1.0p) power management proposal. The VESA DPMS
proposal provides four phases of power saving modes by detecting the horizontal or vertical sync signal. When the
LCD Monitor is in power saving mode or detects an incorrect timing, the Monitor screen will go blank, and the power
LED indicator will start to blink.
6
Advertisement
Table of Contents
