Table of Contents
Advertisement
Chapter 1
Connect the 9-pin RS232 connector end of the PS/2 to RS232 cable provided with the op-
tional touch screen package to the 9-pin RS232 serial port at the back of your PC. Please
refer to Figure 1-8.
Power Management System
The LCD Monitor complies with the VESA DPMS (version 1.0p) power management proposal. The VESA
DPMS proposal provides four phases of power saving modes by detecting the horizontal or vertical sync
signal.
When the LCD Monitor is in power saving mode or detects an incorrect timing, the Monitor screen will go
blank and the power LED indicator will start to blink.
7
Advertisement
Table of Contents
