Planar PT1814NUV Manual page 4

Planar manual lcd monitor pt1814nuv
Table of Contents

Advertisement

User's Manual
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean the LCD Monitor screen, first, make sure the Monitor is in the power off mode.
Unplug the Monitor from its power source before cleaning it. Do not spray liquid cleaners
directly onto the unit. Stand away from the LCD Monitor and spray cleaning solution onto
a rag. Without applying excessive pressure, clean the screen with the slightly dampened
rag.
2. Do not place your LCD Monitor near a window. Exposing the Monitor to rain, water,
moisture or sunlight can severely damage it.
3. Do not place anything on top of the Monitor-to-PC signal cord. Make sure the cord is
placed in an area where it will not be stepped on.
4. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent
damage to the display.
5. Do not remove the cover or attempt to service this unit by yourself. You may void the
warranty. Servicing of any nature should be performed only by an authorized technician.
6. Safe storage of the LCD Monitor is in a range of minus 20 to plus 65 degrees Celsius
(68°F-149°F). Storing your LCD Monitor outside this range could result in permanent
damage.
7. If any of the following occurs, immediately unplug your Monitor and call an authorized
technician.
• The power or Monitor-to-PC signal cord is frayed or damaged.
• Liquid has been spilled onto the Monitor, or it has been exposed to rain.
• The Monitor has been dropped or the case has been damaged.
8. The appliance should be disconnected from the mains by pulling the mains power
cord/mains plug.
9. The socket-outlet shall be installed near the equipment and shall be easily accessible.
ii

Advertisement

Table of Contents
loading

Table of Contents