UTStarcom TXT8010 User Manual page 22

• Mobile Web / • Phone Settings / • Pictures / • PIX Place / • Settings &
Tools / • Sounds Settings / • Sync Music / • Tools / • Browse & Download
3. To reset selected location directional key setting, pressing Right
Soft Key Options > Reset [Location] Key > Yes > OK.
4. To reset all location directional keys setting, pressing Right Soft
Key Options > Reset Directional Keys > Yes > OK.
VOICE COMMANDS
(Menu > Settings & Tools > 6 > 3)
You can use voice commands to control your device.
MODE
(Menu > Settings & Tools > 6 > 3 > 1)
1. Select "Prompts", "Readout" or " or "
"Tones Only" with the Navigation " with the Navigation "
Key up or down: > OK.
• Prompts: Reads out only the command prompts, outgoing caller ID (contact name
and type or number), and confirming message recipient (contact name
and type or number) when using the Send command.
• Readout: Reads out prompts, menus, outgoing caller ID (contact name and type or
number), status information, and confirming message recipient (contact
name and type or number) when using the Send command.
• Tones Only: Will only prompt the user with a tone (in place of the Readout prompt).
If you change the setting details in the phone' s mode in Voice Commands, it will
affect the mode in Sound (refer to page 51) or vice versa.
42 42 Chapter 4 − Menu Function
CALL ALERT
(Menu > Settings & Tools > 6 > 3 > 2)
1. Select "Ring Only", "Caller ID + Ring" or " or " "Name Repeat" with the " with the "
Navigation Key up or down: > OK.
• Ring Only: Deactivate Voice Call Alert. You can hear ringtone only.
• Caller ID + Ring:
Playback the Voice Call Alert once and then you will hear ringtone.
• Name Repeat: Activate Voice Call Alert. You will hear the caller' s details repeatedly.
For more information about the enhanced voice commands supported by your
device, see "Voice Tools". Please refer to page 48 for more details.
LANGUAGE
(Menu > Settings & Tools > 6 > 4)
Selects the language in which letters are displayed on the screen.
1. Select "English" or "Español" with the Navigation Key " or "Español" with the Navigation Key " up or down.
> OK.
LOCATION
(Menu > Settings & Tools > 6 > 5)
To determine whether or not the network system can detect your position:
1. Select "Location On" or "E911 Only" with the Navigation Key " or "E911 Only" with the Navigation Key " up or
down: > OK.
• Location On: Your location is now available to the network.
• E911 Only: Your location will be hidden from network & application except 911.
SECURITY
(Menu > Settings & Tools > 6 > 6 > Password)
Prevents unauthorized use of your phone. The following settings can be restricted:
1. Enter your lock code. > OK.
After three consecutive incorrect Lock Code entries, "INCORRECT CODE. PLEASE RE-ENTER
CODE" appears, and the Lock Code is blocked. If you forget any of these codes, contact
your service provider.
EDIT CODES
(Menu > Settings & Tools > 6> 6 > Password > 1)
Changes your Device/Location 4-digit lock code.
Phone Only nly
(Menu > Settings & Tools > 6 > 6 > Password > 1 > 1)
Changes your phone' s 4-digit lock code.
1. Enter a "New Code" , and re-enter a "New Code"> OK.
Calls & Services
(Menu > Settings & Tools > 6 > 6 > Password > 1 > 2)
Changes your Calls & Service' s 4-digit lock code.
1. Enter a "Current Code" , and enter a "New Code", and then re-enter
a "New Code"> OK.
RESTRICTIONS
(Menu > Settings & Tools > 6> 6 > Password > 2)
You can restrict the use of your phone for outgoing calls, incoming calls, outgoing
messages, incoming messages and dial-up modem.
1. Enter your current lock code. > OK.
Location Setting Location Setting
(Menu > Settings & Tools > 6 > 6 > Password > 2 > 1)
1. Select "Unlock Setting" or "Lock Setting" with the Navigation Key
up or down. > OK.
Calls
(Menu > Settings & Tools > 6 > 6 > Password > 2 > 2)
1. Select "Incoming Calls" or "Outgoing Calls" with the Navigation Key
up or down. > OK.
2. Select "Allow All", "Contacts Only" or "Block All" with the Navigation
"Contacts Only" "Contacts Only" or "Block All" with the Navigation
Key up or down. > OK.
Messages Messages
(Menu > Settings & Tools > 6 > 6 > Password > 2 > 3)
1. Select "Incoming Messages" or "Outgoing Messages" with the
Navigation Key up or down. > OK.
2. Select "Allow All"or "Block All" with the Navigation Key up or
down. > OK.
Menu Function − Chapter 4 43