Voice Commands - UTStarcom TXT8010 User Manual

VOICE COMMANDS

(Menu > Settings & Tools > 2 > 1)
Your phone is equipped with an AVR (Advanced Voice Recognition) feature.
This feature allows you to make calls or use the phone' s functions by simply
using your voice. All you have to do is talk into the phone, and the phone will
recognize your voice and complete tasks by itself.
1 1 . The phone displays the Command menu and prompts you to say
the name of the command you want to use. To complete your task,
simply follow the voice prompts. You can speak the name of the
command after you hear a beep.
You can hear a beep in the Tone Only Mode (Settings & Tools > Phone Settings > Voice
Commands >Mode > Tones Only Mode) while you can see a prompt without a beep
sound in the Prompt Mode or Readout Mode.
2 2 . Select one of the following options by pressing the Navigation Key
up or down. > OK.
• Call <Name or #> / • Send <MSG Type> / • Go To <Shortcut> /
• Check <Item> / • Contact <Name> / • Play <Playlist> / • My Account / • Help
3 3
. When it recognizes one of these commands, the phone launches the
associated application. If the phone does not hear a command within
approximately eight seconds, AVR mode will turn itself off.
48 48 Chapter 4 − Menu Function
CALL <NAME OR #>
Use the Call command to voice dial a name from your contact list or a phone
number. When dialing a number, pronounce each digit, but do not pause noticeably
between the digits.
1. You will hear "Please say a command" and the Voice Commands
menu will be displayed.
2. If calling a contact from your list, say Call <Name>. Your phone
will ask you to confirm the name you said. Say Yes if it was
repeated correctly. That phone number will be dialed. If there is
more than one number saved for that contact, you will be asked to
confirm which number to dial.
Examples: - Call Tom Smith, - Call 617 555-1212, - Call
Bob Carson' s mobile, - Call Dee Harper at Home.
SEND <MSG TYPE>
Use the Send command to send a text or other type of message to a specified name
or number.
1. You will hear "Please say a command" and the Voice Commands
menu will be displayed.
2. Say "Send" followed immediately by one of the following items:
• Text / • Picture
Examples: - Send Picture to Dee Harper' s Mobile,
- Send Text Tom Smith.
GO TO <SHORTCUT>
Use the Go To command to open an application on your phone. You can say "Go To"
by itself and be prompted to say the application name, or you can skip the prompt
by saying "Go To" followed by the application name.
1. You will hear "Please say a command" and the Voice Commands
menu will be displayed.
2. Say "Go To" followed immediately by one of the following items:
• Contacts / • Recent Calls / • Messaging / • Media Center / • Settings & Tools
• Mobile Web / • My Music
CHECK <ITEM>
The Check command lets you check status information for your phone. You can say
"Check" or "Check Status" to see and hear all status information.
1. You will hear "Please say a command" and the Voice Commands
menu will be displayed.
2. Say "Check" followed immediately by one of the following items:
• Status / • Voicemail / • Messages / • Missed Calls / • Time /
• Signal Strength / • Battery / • Volume
CONTACTS <NAME>
Use the Lookup command to retrieve and display information for any name stored
in your contact list.
1. You will hear "Please say a command" and the Voice Commands
menu will be displayed.
2. Say "Lookup <Name>".
Examples: - Lookup Tom Jones.
3. The View Contact page will be displayed for that contact name.
/
PLAY <PLAYLIST>
Use the Play command to playback one of the playlists. Say "PLAY" followed by a
playlist and your phone will playback the recognized playlist for you.
1. You will hear "Please say a command" and the Voice Commands
menu will be displayed.
Menu Function − Chapter 4 49