Harman Stove Company Accentra-2 Installation And Operating Manual page 20

The unit should be out and cool to clean the door glass. It may not always be possible to allow
the urrit to cool off before cleaning. Therefore, if the unit is turned to the lowest setting about 1 hour
before cleaning, it will make it possible to clean the glass with the unit in operation.
Any glass cleaner with a high amonia content will work the best. Use or~ly non-synthetic cleaning
rags such as cotton or paper towels.
CAUTION: Take care when spraying cleaner on the side surface of the glass. The glass may be
hot enough to cause undesirable fumes to fill the area around the unit very rapidly. Gloves and
eye protection are recommended.
Inspect the hopper lid sponge gasket. It is important
to maintain a good hopper lid seal.
/
HI-LO
Fig. 34