Advertisement
2
A
B
C
506-7077
STINGER INSTALLATION / FOR 2" INSTALLATION
- A. Slide Adapter Sleeve onto stinger - align holes in adapter with holes
in stinger.
- B. Secure Adapter with M6 Flat Head Screw and Hex Key.
- C. Slide stinger into receiver until hole in stinger aligns with hole in receiver.
Secure in position with M12 receiver bolt, M12 lock washer and M12 flat
washer as illustrated. Firmly tighten using Thule tool.
STINGER INSTALLATION / FOR 1-1/4" INSTALLATION
- Slide stinger into receiver until hole in stinger aligns with hole in receiver.
Secure in position with M12 receiver bolt, M12 lock washer
and M12 flat washer as illustrated. Firmly tighten using Thule tool.
Advertisement
