Table of Contents
Advertisement
Optional Mounting Alternatives
Warning:
The monitor stand base may forcefully extend and cause injury.
Raise the monitor to its "Full Up" position before removing the monitor
stand.
Detaching LCD Monitor from Its Stand
Unscrew screws
the swivel base support column and pull down
second.
Interface for Arm Applications
Before installing to mounting device, please refer to Fig.1-3.
The rear of this LCD display has four integrated 4 mm, 0.7 pitches
threaded nuts, as well as four 5 mm access holes in the plastic covering
as illustrated in Figure 1-4. These specifications meet the VESA Flat
Panel Monitor Physical Mounting Interface Standard (paragraphs
2.1 and 2.1.3, version 1, dated 13 November 1997).
Note :Please using Ø 4mm x 8mm (L) screw for this application.
Power Management System
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The
VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED
indicator will light yellow.
the
6
Figure 1-3
Figure 1-4
Advertisement
Table of Contents
