Content Operation Instructions ......................2 Safety Precautions ........................3 First Setup ............................4 Front View of the Product ......................5 Rear View of the Product ......................6 Quick Installation ........................7 Basic Operation .........................8 Advanced Operation—OSD Menu ..................10 Supporting Timing Modes ....................12 Technical Information ......................13 Wall-mount instruction ......................14 Care and Maintenance ......................15 Troubleshooting ........................15 Product Registration and Technical Support ..............16...
Operation Instructions Thank you for purchasing this TFT LCD Monitor, a high-resolution multi-scan color TFT LCD Monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This TFT LCD Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Safety Precautions This TFT LCD Monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the TFT LCD Monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy.
First Setup Congratulations on your purchase of this high performance TFT LCD monitor. This TFT LCD Monitor comes with the following accessories : ● User's Guide ● LCD Monitor ● Base ● Power Cable ● VGA Cable (15 pin) Install the stand base 1.
Front View of the Product 3 4 5 6 Auto Image Adjust/ OSD Exits OSD Turn On/ Confirm Selection Scroll Down/ Adjust Decrease Scroll UP/ Adjust Increase/ Source select Power On/ Off LED Indicator...
Quick Installation 1. Connect either VGA or DVI Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect power cord to a properly grounded AC outlet, and then to the monitor. 3. Power-ON computer and then POWER-ON the monitor. 4.
Basic Operation Before using the TFT LCD Monitor: Connect external equipments properly. Power On/Off To turn the TFT LCD Monitor on/off: Press POWER button on the front of TFT LCD Monitor. The power LED indicator lights green when the TFT LCD Monitor is on. Using the OSD Menu You are able to use OSD menus to adjust various settings by using menu button on the front of the TFT LCD Monitor.
Page 10
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the button for 5 seconds to lock all 5 buttons. The TFT LCD Monitor will show an “Locking Power Button” message for 2~4 seconds and the message will disappear automatically.
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your TFT LCD Monitor. Press the Menu button to display the OSD Menu, and use +/- to select the desired OSD menu. Short Cuts Function from the button(s) Auto Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H.
Page 12
Recall: To recall factory settings, You can select recall color only or recall all settings. Information: To display the information, regarding the current input signal coming from the graphic card in your computer. Aspect Ratio: To select full- screen or 4:3 image size.
Supporting Timing Modes STANDARD RESOLUTION 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA...
Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This TFT LCD Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the TFT LCD Monitor before performing the procedure below. 1.
Care and Maintenance Care ● Avoid exposing your TFT LCD Monitor directly to sunlight or other heat source. Place your TFT LCD Monitor away from the sun to reduce glare. ● Put your TFT LCD Monitor in a well ventilated area. ●...
Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/registration/...
Need help?
Do you have a question about the PL2210W and is the answer not in the manual?
Questions and answers