Connecting The Lcd Monitor And Base; Optional Mounting Alternatives; Tilt, Swivel And Pivot Rotation; Detaching Lcd Monitor From Its Stand - Planar PX2211MW User Manual

Connecting the LCD Monitor and Base

When you open the box, place the monitor and put on
the desk first. (See fig. 1-1)
Connect the LCD monitor and base.
Using your hand, lock the base and neck by screwing
the thread clockwise.
To unlock the height adjustment feature of the stand,
locate the pin on the back of the stand column and
turn the pin knob counter-clockwise.
Mount the cable clip for cable management.

Optional Mounting Alternatives

Warning: The monitor stand base may forcefully extend and cause injury. Raise the monitor to its "Full Up"
position before removing the monitor stand.

Tilt, Swivel and Pivot Rotation

The LCD Monitor is designed to have a tilt
range of -5°to +20°, a swivel range of -35°to
+35°, and a 90° pivot rotation. (See fig. 1-2)
Warning
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will
result in damaging the Monitor and Monitor stand.

Detaching LCD Monitor from Its Stand

Unscrew screws the swivel base support column and
pull down the hinge to release.
Cable management ring.
2
+20
35
-5
5
4
hook up the cable clip
3
PIN is pull out with draging
Figure 1-1
90
35
UP
Figure 1-2
1
3
2
Figure 1-3