Description Of The Appliance - EURO EG90GFSX User And Installation Manual

ELECTRONIC PROGRAMMER
- Minute counter
- Manual operation mode
- Setting time forward
The digital display (N) always shows the time and
minute counter time by pressing the corresponding
push button.
N.B.: At the end of each setting session (except
for the minute counter) the programmer turns the
oven off. Check when next using the oven, if the
programmer is not going to be used, that the latter
is set on manual operation (see the instructions
given further on).
Setting the time (from 0.01 to 24.00 = hh,mm)
After connecting to the electricity mains or subsequent
simultaneously on the display.
Once set the AUTO symbol will turn off and
the symbol, for manual operation, will turn on.
Minute counter (from 0.01 to 0.59 = hh,mm)
the set time the buzzer will go off and the
turns off.
Semi-automatic operation
(with cooking time from 0.01 to 23.59 = hh,mm)
symbols will light up and stay on all the time. At the end
of the set time the
Semi-automatic operation
(with end of cooking time from 0.01 to 23.59 = hh,mm)
symbols will turn on and stay on all the time. At the end
of the set time the

DESCRIPTION OF THE APPLIANCE

symbol will turn off, the AUTO
symbol will turn off, the AUTO
1 2 3 4 5 6
Automatic operation
(with the start of cooking time delayed)
and
previously. The
and the buzzer will go off.
Manual operation
Manual operation is only possible when the automatic
and the
Buzzer
The buzzer will go off at the end of a programme or at
minutes. The buzzer can be stopped by pressing one of
the function push buttons.
Programme start and control
The programme starts after setting. The programme
symbol
set can be controlled at any time by pressing the
corresponding push button.
Correcting/cancelling the programme setting
An automatic function programming error will occur if the time
time. Any programme that has been set can be corrected
at any time by pressing the corresponding programming
the time set bringing it to a value of "0.00". If functioning
time is cancelled the end of functioning is cancelled too
and vice versa. The oven turns off automatically and the
on manual operation. The right time cannot be corrected
12
M
A
U
T
O
symbol will turn on) and then the end of
symbol will turn on again when
symbol turns on.
N