OM-2029
(5) Water Temperature Sender
The water temperature sender (19, Fig. 3) is mounted at the top rear of the engine. This device
actuates the temperature gage (5, Fig. 9) on the engine control panel.
(6) Oil Pressure Sender
The oil pressure sender (17, Fig. 3) is mounted at the right lower rear of the engine. This device
senses oil pressure and operates the oil puressure gage (4, Fig. 9) on the engine control panel.
(7) Exhaust system
The exhaust system consists of a special noise reducing muffler (2, Fig. 5) which is connected by
a pipe (1) to a conventional exhaust manifold. The tail pipe (3) directs exhaust and noise down-
ward.
(8) Radiator
The radiator (1, Fig. 3) is a one-piece item designed for long periods of operation without servic-
ing. Refer to Section 2-1, Para. 6, G, for servicing procedure.
1-1
Page 10
1. Pipe, manifold-
to-muffler
2. Muffler
3. Exhaust Pipe
Exhaust System
Figure 5
September 30/89 Revised