Resume By Alarm - MSI MS-6339 User Manual

Wake Up On Ring/Wake Up On LAN
During Disabled, the system will ignore any incoming call from the
modem/LAN. During Enabled, the system will boot up if there's an incoming
call from the modem/LAN.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system. Then, power off the system. This
function will work the next time you power on.
Wake Up On PME
This option enables the system to comply with PCI specification
version 2.2. PCI card should be present to enable power on or resume from
the PME signal.

Resume By Alarm

This function is for setting the Date, Hour, Minute, and Second for
your computer to boot up. During Disabled, you cannot use this function.
During Enabled, Choose the Date, Hour, Minute, and Second:
Alarm Date
Alarm Hour
Alarm Minute
Alarm Second
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system. Then, power off the system. This
function will work the next time you power on.
Select which day the system will boot up.
Select the hours for the system to boot up.
Select the minutes for the system to boot up.
Select the seconds for the system to boot up.
3-14
®