Advertisement
HOW TO USE
• Switch the product on by pressing the On/Off button.
• Always comb your beard or moustache with a fine comb before you start
trimming.
ATTACHING AND REMOVING THE COMBS
• Select the desired trimming length comb. Place the comb over the top of the
blade and gently push this down onto the blade until it clicks into place.
• To remove the comb, grasp the comb and pull firmly upwards and away from the
groomer.
REMOVING AND ATTACHING THE TRIMMER HEADS
• To remove: Turn the trimmer head anti-clockwise until it clicks, and then lift the
trimmer head away from the groomer.
• To attach: Place the trimmer head on the groomer and turn clockwise until it
clicks into place.
BEARD TRIMMING
• Select your desired trimming length comb. If you are trimming for the first time
start with the maximum trimming length setting.
• Turn the groomer on.
• Place the flat top of the fixed comb against the skin.
• Slowly slide through the hair, against the direction of growth. Repeat from
different directions as necessary.
• If hair builds up in the trimmer comb during the trimming process, switch the
groomer off, pull off the comb and brush the hair off.
TO GET A CLEAN SHAVEN LOOK
• To trim any length of beard or stubble hair for a clean, shaven look then follow the
above steps without a comb attached to the blade head.
• Place the flat top of the blade against the skin and slowly slide through the hair
against the direction of growth.
TRIMMING AND EDGING
• Hold the groomer with the back side of the blade facing you with no combs
attached.
• Start with the blades resting lightly against your skin and motion the blade
towards the edge of your beard line to trim the desired facial hair.
• Shape as desired.
5
Advertisement
