Self-Test - Merck Spectroquant Prove 100 Quick Manual

3 Getting started –
1
2. The calendar view pops up
4
2
3. Tap on OK to confirm.
3
4. Tap on the arrow button
specific basic date setting. The date format can be set and
displayed for EU and US.
3
8
9
4
5. Tap on the time format button
pops up. Now you can enter the time.
6. Tap on OK to confirm.
7
7. Tap on the arrow button
specific basic time setting. The time format can be set and
displayed for EU and US.
8. Tap on the arrow button
"." / "," used in your country.
9. Tap on the Save button
5
12
3.2 Initial setup
. You can now enter the date.
2
2
to choose the country-
4
6
5
10
7
. The numeric key panel
5
to choose the country-
8
to choose the decimal separator
9
to confirm.
10

3.2.5 Self-test

Following language, date and time setup the spectrophotometer
performs a self-test.
3
1. Remove all cells and close the cell compartment cover.
2. Start the self-test with the Start button
3. The spectrophotometer performs the self-test.
Self-test
The self-test covers:
• C hecks on memory, processor, internal interfaces, filter
and lamp
• A calibration of the wavelength
When the self-test has ended, the display shows the main menu.
6
1
.
1
Version 1.1 – 10/2015