First Power-On; Language Setup; D Ate, Time And Country-Specific Settings - Merck Spectroquant Prove 100 Quick Manual

3.2.2 First power-on

After switching on the spectrophotometer for the first time you
are automatically guided through the language, date and time
setup procedures (see below).
1
1. Press the ON / OFF button
an audible signal (beep) and starts booting for approximately
2 minutes. You will see the following display:
2. The display switches to language setup
Version 1.1 – 10/2015
. The spectrophotometer gives
1
(see Section 3.2.3).
3 Getting started –

3.2.3 Language setup

The software supports several languages. When you switch
on the spectrophotometer for the first time, a list of language
options is automatically displayed after the boot procedure.
1
1. Select the desired language
2. Tap on the Save button to confirm.
2
NOTE
The saving process of changing the language requires some
seconds.
3.2.4 D ate, time and country-specific settings
During initial setup, having set the language option you are
automatically guided through the date and time setup procedure.
1. Tap on the date format button
3.2 Initial setup
2
.
1
1
.
1
1
2
3
4
5
11