Pitney Bowes J693 Operator's Manual page 76

If experiencing this problem...
Intellifont will not print:
Light print on the right side
(facing the printer) of the
label:
Missing information in the
printed label:
Missing print on left or right
side of the label:
(Continued next page)
66
Try this solution...
Intellifont format is Little/Big Endian
specific. The printer uses Big Endian. Refer
to your font supplier for information.
The Printhead Leveling Cam may be
incorrectly adjusted; see Section 5.3.1.
The Platen Roller may be dirty or worn;
see Section 5.5.2.
Check the label format for character
placement outside the dimensions of the
label; all row/column values must allow
enough space for the height/length of the
characters and bar codes to be printed
within the format size.
The available memory may have been
exceeded by the memory requirement of
the label format. Try reducing the memory
allocated to either the internal module or
scaleable font
Settings/Memory Settings – Section 4.1.4.
Information may be formatted outside the
label dimensions. Check your software
program label size or check the values in the
menu for Print Control / Column Offset and
Print Control / Custom Adjustments /
Column Offset; see Section 4.1.2.
caches; see
J693
System