Communications - Pitney Bowes J693 Operator's Manual

4.1.5

Communications

SERIAL PORT A
BAUD RATE
38400
28800
19200
a
9600
4800
2400
PROTOCOL
a
BOTH
SOFTWARE
HARDWARE
NONE
PARITY
a
NONE
ODD
EVEN
DATA BITS
7
a
8
STOP BITS
a
1
2
SERIAL PORT B
PARALLEL PORT A
PORT DIRECTION
a
UNI-DIRECTIONAL
BI-DIRECTIONAL
PARALLEL PORT B
(Continued next page)
28
Controls Serial Port A communications
settings.
Determines the serial communication rate.
9600 bits per second
Sets the flow control (handshaking) method.
Uses both handshaking methods.
XON/XOFF
CTS/DTR
No flow control is used.
Sets Word parity
No parity
Odd parity
Even parity
Sets Word length
Seven bit Word length
Eight bit Word length
Sets the number of stop bits
One stop bit
Two stop bits
Same as Serial Port A, for optional wireless
connection. If not installed, this displays
"NOT INSTALLED" when accessed.
Controls Parallel Port A communications
settings.
Determines if messages are sent from the
printer to the host via the parallel port.
One-way printer communication.
Enables IEEE
operation.
Same as Parallel Port A, for optional
Ethernet connection. If not installed, this
displays "NOT
accessed.
1284 back-channel
INSTALLED" when
J693