Updating From The Download Mode - Pitney Bowes J693 Operator's Manual

5.6.2

Updating from the Download Mode

Required Update Procedure for Application Version 2.08 or earlier*
Step Displayed Message
1.
2.
3.
4.
5.
*This can also be used as an alternate download method for all other version levels.
J693
Operator Action
Press and hold the
PAUSE and TEST
keys while turning
'On' the printer to
enter the Download
Mode.
Using the DOS
copy command,
copy the filename
to the printer (see
Step 2 in Section
5.6.1).
No action required. The printer is receiving
No action required. The program has been
No action required. The new program is being
Comment(s)
The Boot Loader version
is displayed.
; ;
Note: This information
will vary with the printer
model and Boot Loader
version.
The printer is ready to
accept the new application
version.
; ;
Note: The parallel port
(LPT1) must be used to
write to the printer.
the new image (program).
received and verified; now
Flash memory is cleared
of the previous
application.
written into Flash memory.
Upon completion, the
printer will automatically
reset, starting the new
application; however,
before continuing, the
printer must be re-
calibrated; see Section 5.2.
61