Print Control - Pitney Bowes J693 Operator's Manual

Pitney bowes inc. printer user manual
Table of Contents

Advertisement

4.1.2

Print Control

HEAT
— —
10 (0-30)
PRINT SPEED
FEED SPEED
REVERSE SPEED
ROW OFFSET
— —
00.00in (0-99.99)
COLUMN OFFSET
— —
00.00 in (0-99.99)
LABEL WIDTH
PRESENT DISTANCE
— —
0.72 in (0-4.00)
CUSTOM ADJUSTMENTS These
DARKNESS
XX
(1-64)
ROW ADJUST
XXX DOTS (0-128)
COLUMN ADJUST
XXX DOTS (0-128)
PRESENT ADJUST
XXX DOTS (0-128)
J693
Controls the printhead 'burn-time'; see Section
2.1.1 for more on print quality control.
Controls the rate of label movement during the
printing process; see Appendix C.
Controls the rate of label movement between
printing areas; see Appendix C.
Controls the rate of label movement during
backup positioning for start of print, cutting or
present distance; see Appendix C.
Shifts the vertical start of print position. This is
the user setting for row adjustment.
Shifts the horizontal, left-justified start of print
position to the right. Does not shift label width.
Sets the maximum limit for the printable surface
width. Images or data beyond this limit will not
print; see Appendix C.
Specifies an additional amount to advance the
label after printing. When the next label format
is received, the printer backfeeds to the start
position. Only the last label of the batch will be
presented if the present sensor is not enabled.
factory
change listed parameters, compensating for
slight mechanical differences sometimes evident
when multiple printers share the label formats.
Controls the printhead strobe time to fine-tune
the HEAT setting.
Shifts the vertical start of print position
upward in dots to fine-tune the ROW OFFSET
setting; see Appendix C.
; ;
Note: A Positioning Calibration must be
performed before this parameter takes effect;
see Section 5.1.
Shifts both the horizontal start of print position
and the LABEL WIDTH termination point to
the right in dots to fine-tune the COLUMN
OFFSET setting; see Appendix C.
Adjusts the label stopping position in dots to
fine-tune the PRESENT DISTANCE setting;
see Appendix C.
adjustments
independently
21

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Pitney Bowes J693

Table of Contents