Pitney Bowes J693 Operator's Manual page 39

Communications (continued)
HOST SETTINGS
HOST TIMEOUT
—
10 SEC
CONTROL CODES
a
STANDARD CODES
ALTERNATE CODES
ALTERNATE CODES 2
ALTERNATE CODES 3
FEEDBACK MODE
ENABLED
a
DISABLED
J693
Settings which affect all communications
with a host.
The number of seconds a communications
(1-60) port must be idle before the printer may
process data from a different port. This
value is also used to "timeout" an image /
label download.
Allows the operator to change the prefix
of the commands interpreted by the
printer.
Hex 01 = SOH command; Hex 02 = STX
command; Hex 0D = CR
Hex 5E = SOH command; Hex 7E = STX
command; Hex 0D = CR
Hex 5E = SOH command; Hex 7E = STX
command; Hex 7C = CR
Hex 5E = SOH command; Hex 23 = STX
command; Hex 0D = CR
Returns a Hex 1E, [RS], after each label
successfully prints, and a Hex 1F, [US],
after each batch of labels is printed.
Feedback characters are sent to the host.
No feedback characters are sent.
29