Flying Bird; Recycled Parts Required - Merlin 6-IN-1 DIY Educational Solar Toy Kit Instruction Manual

d) The final step to take is put some coin in the bottom of the
Yacht in the holder provided. This acts as a weight to keep the
Yacht in the water. This completes the Yacht. The propellers will
now rotate and the Yacht will sail.
Running

5. Flying Bird

For the flying bird you will need an empty plastic bottle of any
size.
Flying bird
a) The first step is to assemble the arm the bird is attached to.
Clip the pieces into place as shown in figure 1.
b) Assemble the counter balance unit which will house the
coins to even wright distribution (Fig 2).
Top View: Insert Coin
Fill up with coins completely!!
Loose space is not allowed, or
it may have coins spread out.
Assembly & Play

Recycled Parts Required

Plastic Bottle
Part
Part
c) Assemble the drive shaft unit and attach it to the Gearbox
unit. (Fig 3 -4)
Gear Box
d) Next take the Gearbox unit and attach the parts that will
form the wings (fig5 - 6). At the bottom of the Gearbox an arm
is placed. Attach to this arm the wheel that contains the eye (fig
7).
e) Now prepare the wings by removing them from the
packaging and cutting them free from each other (fig 8). Now
use the adhesive pads and attach the wings to the main
assembly. Also add the parts at the back to form the tail (fig 9).
Right Wing
Bottom View
Right Wing Left Wing
Left Wing
9