Walking Robot; Assembly & Play - Merlin 6-IN-1 DIY Educational Solar Toy Kit Instruction Manual

wheel assembly.
d) Now we can put all the module together and
form your racer. The modules all clip together
easily. When its completed the CD racer should
look like the one in Figure 14. Let's go racing.
Part
Part
Part
Part
Running
e) This unit can be disassembled. If this is done
please follow these instructions to carefully
remove the CD's from the bushing.
Disassemble:

2. Walking Robot

To make the walking robot you will need an empty soda can of
capacity between 330 and 355ml.
Walking Robot:
Part
a) Start by assembling the body for the robot. This will house
the can and the arms will be attached to it. Attach the modules
Gearbox to these parts.
Part
b) Assemble the bushes and attach them to the main body.
CD & Plastic Parts
Assembly & Play:
Soda Can 330-355 ml
Recycle Parts required
Gear Box
4