Specifications - Pioneer MEH-P5350 Service Manual

MEH-P5350

8.2 SPECIFICATIONS

General
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ...................................... 10.0 A
Backup current ................................................ 5mA or less
Dimensions
(DIN) (chassis) ...... 178 (W) × 50 (H) × 157 (D) mm
(nose) .......... 188 (W) × 58 (H) × 22 (D) mm
(chassis) ...... 178 (W) × 50 (H) × 162 (D) mm
(D)
(nose) .......... 170 (W) × 46 (H) × 17 (D) mm
Weight ...................................................................... 1.1 kg
Amplifier
Continuous power output is 22 W per channel min. into 4
ohms, both channels driven 50 to 15,000 Hz with no more
than 5% THD.
Maximum power output ...................................... 50 W × 4
70 W × 1 ch/2 Ω (for Subwoofer)
Load impedance
...................... 4 Ω (4 – 8 Ω [2 Ω for 1 ch] allowable)
Preout maximum output level/
output impedance .................................... 2.2 V/1 kΩ
Equalizer (3-Band Parametric Equalizer)
(Low) .......................... Frequency: 40/80/100/160 Hz
Q Factor: 0.35/0.59/0.95/1.15
(+6 dB when boosted)
(Mid) .......................... Frequency: 200/500/1k/2k Hz
Q Factor: 0.35/0.59/0.95/1.15
(+6 dB when boosted)
(High) ................ Frequency: 3.15k/8k/10k/12.5k Hz
Q Factor: 0.35/0.59/0.95/1.15
(+6 dB when boosted)
Loudness contour
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)
Tone controls
(Bass) .......................... Frequency: 40/63/100/160 Hz
(Treble) .................. Frequency: 2.5k/4k/6.3k/10k Hz
Subwoofer output
Frequency ............................................ 50/80/125 Hz
Slope ........................................................ –12 dB/oct.
Gain ................................................................ ±12 dB
MD player
System ................................ Mini disc digital audio system
Usable discs ........................................................ Mini disc
Signal format .................... Sampling frequency: 44.1 kHz
Frequency characteristics ............ 20 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ...... 94 dB (1 kHz) (IEC-A network)
Dynamic range ............................................ 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
FM tuner
Frequency range ...................................... 87.5 – 108 MHz
Usable sensitivity ...................................................... 9 dBf
50 dB quieting sensitivity ........................................ 15 dBf
Signal-to-noise ratio ...................... 70 dB (IEC-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range ........................ 531 – 1,602 kHz (9 kHz)
Usable sensitivity .............................. 18 µV (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
Level: ±12 dB
Level: ±12 dB
Level: ±12 dB
(volume: –30 dB)
Level: ±12 dB
Level: ±12 dB
Note:
• US and foreign patents licensed from Dolby
Laboratories.
• Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.
Number of quantization bits: 16; linear
(0.8 µV/75 Ω, mono, S/N: 30 dB)
(1.5 µV/75 Ω, mono)
530 – 1,640 kHz (10 kHz)
50 dB (±10 kHz)