Table of Contents
Advertisement
11.
FACTORY RESET
Enter Factory Reset Mode
To reset the A3 Pro to factory settings, press and hold the button while turn on the receiver power supply, release it when
LED starts flash Violet quickly. (FYA: You should need to hold the button for at least 8 seconds until the LED quickly blinks
Violet to get into the reset program)
How to reset?
After entering the reset mode, the LED will blink in different colors. Press and hold the button for 2 seconds until LED
flashes Violet once slowly to confirm the reset. After reset is done, the gyro will start the initialization normally. If you don't
want to reset, just remove the battery when LED is blinking in different colors.
12.
LED DESCRIPTIONS
support@hobbyeagle.com
Blue, Flashing
Solid Red
Solid Blue
Blue, Flashing
Solid Violet
Violet, Flashing
Violet, Fast Flashing
Red, Slow Flashing
Red, Fast Flashing
Blue, Fast Flashing
Power-on initialization and self-test
Gyro-Off Mode
Normal Mode
Atti-Lock Mode
Trainer Mode
Auto-Level Mode
Auto-Hover Mode
TX signal lost. Check the connection to the receiver
Gyroscope sensor error
Calibrating or testing
17
Hide quick links:
Advertisement
Table of Contents
