Receiver Menu - Eagle A3 Pro Instruction Manual

9.

RECEIVER MENU

The Receiver Menu allows you change the receiver type and program the channel mappings for all input channels.
Entering the Receiver Menu
To get into the Receiver Menu, press and hold the button while turn on the receiver power supply, release it when LED lights
solid Violet.
Menu Selection
In the Receiver Menu, LED will flash Violet several times every 3 seconds in a loop and the number of times LED flashes
shows at which function item you are currently. For example, one Violet flashing means the first setting "Receiver Type",
after waiting about 3 seconds, a twice Violet flashing means the second setting "Aileron channel", and so on.
Option Selection
When you reach the function that you wish to operate in, short press the button to get into it. After entering in, the current
selected option is indicated by the color of the LED. Each short press of the button advances the option to the next value.
After you finish making your selection, just wait for 5 seconds until LED starts blink quickly which indicates that the modified
is saved and then you will be brought back to the Receiver Menu level automatically. If you don't want to change anything,
just wait for timeout without any operation.
Quit Menu
To get out of the current menu just keep the button pressed (2 seconds) again until LED starts flashing Violet quickly. After
exiting the Receiver Menu, the gyro will start the initialization normally, so the new receiver settings will take effect
immediately without restarting the gyro. Also notice that the channel mapping setting will only take effect when PPM or
Futaba S.Bus receiver type is chosen.
support@hobbyeagle.com 15