Gyro Direction - Eagle A3 Pro Instruction Manual

8.3.
FLIGHT MODE
This function allows you preset the desired flight mode for each position of
the switch. Short press the button when LED is flashing 3 times in the Setup
Menu to get into the Position Selection Menu. In this second-level menu,
LED will flash Blue several times every 3 seconds in a loop and the number
of times LED flashes shows at which position you are currently. For example,
one Blue flashing means "position-1", after waiting about 3 seconds, a twice
Blue flashing means "position-2", and so on.
When you reach the position that you wish to set, short press the button to
get into it. After entering in the color of LED shows you the flight mode
currently selected for this position. Each short press of the button will switch
to the next mode. After you finish making your selection, just wait for 5 seconds until LED starts blink quickly which
indicates that the modified is saved and then you will be brought back to the Position Selection Menu level automatically.
To get out of the position selection menu just keep the button pressed (2 seconds) again until LED starts flashing Blue
quickly, then you will be brought back to the Setup Menu.
8.4.

GYRO DIRECTION

Here you can reverse the gyro direction for aileron, elevator and rudder.
Short press the button when LED is flashing 4 times in the Setup Menu to
get into the Channel Selection Menu. In this second-level menu, LED will
flash Blue several times every 3 seconds in a loop and the number of times
LED flashes shows at which channel you are currently. For example, one
Blue flashing means "Aileron", after waiting about 3 seconds, a twice Blue flashing means "Elevator", and so on.
When you reach the channel that you wish to set, short press the button to get into it. After entering in the color of LED
shows you the direction currently selected for this channel. Each short press of the button will switch between Normal and
Reversed. After you finish making your selection, just wait for 5 seconds until LED starts blink quickly which indicates that
the modified is saved and then you will be brought back to the Channel Selection Menu level automatically.
To get out of the channel selection menu just keep the button pressed (2 seconds) again until LED starts flashing Blue
quickly, then you will be brought back to the Setup Menu.
CAUTION
It's extremely important to make sure that the gyro reacts in the correct direction for each channel
before flight. An opposite reaction of the gyro could lead to losing control or even crash!
support@hobbyeagle.com
LED Color Description
Gyro-Off Mode
Solid Red
Solid Green Normal Mode
Solid Blue Atti-Lock Mode
Trainer Mode
Solid Yellow
Auto-Level Mode
Solid White
Solid Violet Auto-Hover Mode
LED Color Description
Solid Red Normal (default)
Solid Green Reversed
12