Unpairing The Remote - Chrysler Pacifica Hybrid 2018 Owner's Manual

550 MULTIMEDIA
3. Press the "Remote" button towards the bottom of the
Uconnect Theater touchscreen, within the settings
menu.
4. Press the "Pair Remote" option. Press the "OK" button.
A touchscreen notification will appear indicating that
your remote has been paired successfully or unsuccess-
fully.
5. Test to make sure the remote is successfully paired by
dragging your finger across the gesture pad. If you do
not see the on screen arrow, try using the "Screen"
button on the remote to switch between rear screen one
and rear screen two to make sure the remote is control-
ling the intended screen. It may take several seconds for
the remote to react when initially paired.
NOTE:
• If remote is ever non-operational, try re-pairing remote.
• The system can accommodate up to ten paired remote
controls.

Unpairing The Remote

In events such as updating the Uconnect Theater software,
or taking a remote to another vehicle, the remote will need
to be unpaired from your Uconnect Theater system. To
unpair the remote:
1. Press the Settings icon found in the lower right portion
of the Uconnect Theater touchscreen.
2. Press the "Remote" button towards the bottom of the
Uconnect Theater touchscreen, within the settings
menu.
3. Select "Manage Remote Controls" from the Remote
section of Settings" and follow the on screen instruc-
tions to complete the unpairing process.
4. Once complete, the remote will be ready to pair again.
NOTE: There will be a touchscreen notification message
when unpairing is successful. Repeat the above steps to
unpair a second remote.