AirSep NEWLIFE elite Patient Manual page 33

[Read the Important Safety Rules section before operating this equipment.]
3. Remove or unscrew the medication cup on the nebulizer, and place your prescribed measured dosage into the medication
cup
(Figure 5).
4. Connect the medication cup to the nebulizer, and then connect the T piece or mouthpiece to the nebulizer (Figure 6).
5. Connect one end of the air supply tubing to the air outlet barb fitting and the other end to the bottom of the nebulizer, and
open the air valve completely as shown in Figure 3.
Begin your treatment. (Refer to the Inhaling Medication/Treatment Instruction section
6.
Figure 5 Figure 6
)
27
MN078-1 Rev F
8/12