Removing The Cassette Feed Roller; Procedure - Canon Cassette Module-Y1 Service Manual

4
Parts Replacing and Cleaning > Disassembly/Assembly > Removing the Cassette Feed Roller > Procedure
CAUTION:
Be sure to pass the Right Door Sensor Harness [1] through the Harness Guide [A], and
install the Harness Band [2] at the lower side of the guide [3] when assembling.
(Because the connector cannot be connected to the Right Door Sensor.)
[1]
[A]
4 Parts Replacing and Cleaning > Disassembly/Assembly > Removing the Cassette Feed Roller > Procedure

Removing the Cassette Feed Roller

■ Procedure

CAUTION:
Be sure not to touch the surface of the roller when disassembling/assembling.
[4]
[3]
● Disassembling Procedure
1) Remove the cassette [1].
[2]
F-4-13
F-4-14
[1]
F-4-15
4-8
4-8