Symbol WT4070 Manual

11 x 17 single sheet_072506.fm Page 1 Tuesday, July 25, 2006 11:52 PM
®
WT4070/90 Microsoft CE 5.0
REGULATORY INFORMATION
© 2006 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability,
function, or design. Symbol does not assume any product liability arising out of, or
in connection with, the application or use of any product, circuit, or application
described herein. No license is granted, either expressly or by implication,
estoppel, or otherwise under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or process in which
Symbol products might be used. An implied license exists only for equipment,
circuits, and subsystems contained in Symbol products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies,
Inc. Other product names mentioned in this manual may be trademarks or
registered trademarks of their respective companies and are hereby
acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
Patents
This product is covered by one or more of the patents listed on the website:
http://www.symbol.com/patents.
Warranty
Subject to the terms of Symbol's hardware warranty statement, the WT4070/90
wearable terminal is warranted against defect in workmanship and materials for a
period of twelve months from the date of shipment. For the complete Symbol
hardware product warranty statement, go to: http://www.symbol.com/warranty.
72-86718-01
Revision A — August 2006
Ergonomic Recommendations
CAUTION In order to avoid or minimize the potential risk of ergonomic
injury follow the recommendations below. Consult with your
local Health & Safety Manager to ensure that you are
adhering to your company's safety programs to prevent
employee injury.
• Reduce or eliminate repetitive motion
Maintain a neutral postures
•
Reduce or eliminate excessive force
•
• Keep objects that are used frequently within easy reach
Perform tasks at correct heights
•
• Reduce or eliminate vibration
Reduce or eliminate direct pressure
•
• Provide adjustable workstations
Provide adequate clearance
•
• Provide a suitable working environment
Improve work procedures
•
• Alternate hands whenever possible when performing a repetitive
task.
Regulatory Information
All Symbol devices are designed to be compliant with rules and
regulations in locations they are sold and will be labeled as required.
Regulatory Information is available in French, Italian, German,
Spanish (Spain), Portuguese, Japanese, Korean, Russian and
Simplified Chinese. Please see following website:
http://www.symbol.com/services/manuals/ and look for your specific
product.
Any changes or modifications to Symbol Technologies equipment,
not expressly approved by Symbol Technologies, could void the
user's authority to operate the equipment.
CAUTION Only use Symbol approved and UL Listed accessories,
battery packs and battery chargers.
Do NOT attempt to charge damp/wet mobile computers or
batteries. All components must be dry before connecting to
an external power source.
®
This product contains Bluetooth Complimentary Subsystems:
• BT ID: B02413
BT ID: B01825
•
Country Approvals
Regulatory markings are applied to the device signifying the radio(s)
are approved for use in the following countries: United States,
1,2
Canada, Australia, New Zealand and Europe .
Please refer to the Symbol Declaration of Conformity (DoC) for
details of other country markings. This is available at http://
www2.symbol.com/doc/.
1
Note : For 2.4GHz Products: Europe includes, Austria, Belgium,
Czech Republic, Croatia, Cyprus, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway,
1
Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
2
Note : The use of 5 GHz RLAN's has varying restrictions of use;
please refer to the Symbol Declaration of Conformity (DoC) for
details.
Operation of the device without regulatory approval is illegal.
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of
wireless devices.
Potentially Hazardous Atmospheres
You are reminded of the need to observe restrictions on the use of
radio devices in fuel depots, chemical plants etc. and areas where
the air contains chemicals or particles (such as grain, dust, or metal
powders) and any other area where you would normally be advised
to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so
by airport or airline staff. If your device offers a 'flight mode' or similar
feature, consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect
medical electrical equipment.
Wireless devices should be switched off wherever you are
requested to do so in hospitals, clinics or healthcare facilities. These
requests are designed to prevent possible interference with
sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm
(6 inches) be maintained between a handheld wireless device and a
pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with independent research
and recommendations by Wireless Technology Research.
Persons with Pacemakers
Should ALWAYS keep the device more than 15cm (6 inches) from
•
their pacemaker when turned ON.
Should not carry the device in a breast pocket.
•
• Should use the ear furthest from the pacemaker to minimize the
potential for interference.
If you have any reason to suspect that interference is taking
•
place, turn OFF your device.
Hearing Aids
The wireless device may interfere with some hearing aids. In the
event of interference you may want to consult your hearing aid
supplier to discuss solutions.
2
Other Medical Devices
Please consult your physician or the manufacturer of the medical
device, to determine if the operation of your wireless product may
interfere with the medical device.
FCC / EU RF Exposure Guidelines
Safety Information
The device complies with Internationally recognized standards
covering Specific Absorption Rate (SAR) related to human exposure
to electromagnetic fields from radio devices.
Reducing RF Exposure - Use Properly
It is advisable to use the device only in the normal operating
position.
Wearable Devices
This device was tested for typical body-worn operation. Use only
Symbol tested and approved belt-clips, holsters, and similar
accessories to ensure FCC Compliance. The use of third-party belt-
clips, holsters, and similar accessories may not comply with FCC RF
exposure compliance requirements, and should be avoided.
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated July 26, 2001, and with
EN60825-1:1994+A1:2002+A2:2001 and IEC60825-
1:1993+A1:1997+A2:2001.
The laser classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when
used for their intended purpose. The following statement is required
to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous laser light
exposure.
Class 2 laser scanners use a low power, visible light diode. As with
any very bright light source, such as the sun, the user should avoid
staring directly into the light beam. Momentary exposure to a Class
2 laser is not known to be harmful.
COMPLIES WITH 21CFR1040.10AND 1040.11 EXCEPT FOR
DEVIATIONS PURSUANT TO LASER NOTICE No. 50, DATED
JULY 26, 2001, AND WITH EN60825-1:1994+A1:2002+A2:2001 and IEC60825-1:
1993+A1:1997+A2:2001. THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-103. CET APPAREIL NUMÉRIQUE DE LA
CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA.
3