Table of Contents
Advertisement
5 Using the DVD Player
26
En
Programming a CD/Video CD playlist
1
Press SHIFT then PGM.
Program Track
1(/10)
Current: Track
0.00
Total Time
––
–– –– ––
––
––
––
––
––
––
––
––
––
––
––
––
––
––
–– –– –– –– –– ––
Move
ENTER
Play
Exit
PROGRAM
2
Start entering track numbers.
For tracks 1 to 10, use the corresponding number button. For 11 and over, use the >10
button (>10, 2, 4 for 24, etc.)
3
Press ENTER to start playback immediately, or SHIFT then PGM to
exit if you want to start playback later*
* You can't start program playback later with a PBC Video CD: press
More programming options
There are several other options available when programming/using playlists.
•
To view the playlist, press SHIFT then PGM.
To put a pause in the playlist, press 8 instead of a number.
•
• You can't program two pauses in succession, or start/end a playlist with a pause.
•
To delete an entry from the playlist, position the cursor on the
title/chapter/track number and press C (Clear).
•
To insert an entry into the playlist, position the cursor where you
want the title/chapter/track to appear, then enter its number.
All the following entries move up one.
•
To add an entry to the end of the playlist, press SHIFT then PGM,
enter the title/chapter/track number, then press SHIFT and PGM
again.
•
To add the currently playing title/chapter/track to the playlist,
press SHIFT then hold PGM for about 2 seconds.
• If there is no current playlist, a new one is created. (For DVD: if the last playlist
programmed was for titles, then a title playlist is created; otherwise a chapter playlist
is created.)
To delete the playlist, press 7 to stop playback, then press C
•
(Clear).
•
To delete a memorized DVD playlist, load the DVD disc, press
SHIFT then PGM, then change the Program Memory option to
Off. Press ENTER to confirm.
to start.
ENTER
Advertisement
Table of Contents
