ZiLOG Z80-RIO Operating System User's Manual page 53

CAT CAT
T=type
Only files of the given type will be listed. Type must be
one of 'D' (directory), 'A' (ASCII), 'B' (binary) or 'Pi
(procedure). Subtype may also be specified immediately follow-
ing the type (e.g., 'PI' refers to files of procedure type,
subtype 1). If no subtype is given, all subtypes of the specified
type are listed.
P=props
Only files with exactly the specified properties will be
listed. Props must be from
'WI
(write protected), 'E'
(erase protected), 'L' (properties locked), 'S'
(secret),
'R'
(random), 'F' (force memory allocation), or
'&'. Use of '&' will allow any file with at least the
specified properties to be listed. One or more properties
may be concatenated in which case only files with exactly
(or at least, if '&' is included) the specified properties
will be listed.
D=drive
Only files from the specified drive will be listed. Drive
must be from '0' ••• '7'. Default is to search directories
from all ready drives on the master device. If a device is
specified without a drive (i.e. D=$DFS), all ready drives on
that device will be searched.
F=format
Specifies long (F=L) listing format. The short form
(default) consists of name and drive while the long form
gives name, drive, file type, record count, record length,
file properties, starting address, date of creation, and
date of last modification. Additionally, the number of
files examined, the number of files listed, and the number
of sectors used by listed files are given.
- 41 -