ZiLOG Z80-RIO Operating System User's Manual page 108

MOVE MOVE
T=type
Only files of the given type will be moved. Type must be
one of 'D' (directory), 'A' (ASCII),
IB'
(binary) or 'P'
(procedure). Subtype may also be specified immediately follow-
ing the type (e.g. 'PO' refers to files of prodecure type,
subtype 0). If no subtype is given, all subtypes of the
specified type are moved.
P=props
Only files with exactly the specified properties will be
moved. Props must be from 'WI (write protected), 'E'
(erase protected), 'L' (properties protected), IS'
(secret), 'R' (random), 'F' (force memory allocation), or
1&'. Use of the '&' will allow any file with at least the
specified properties to be moved. One or more properties
may be concatenated, in which case only files with exactly
(or at lea~t, if '&' is included) the specified properties
will be moved.
D=destination device
Defines device to which files are copied. Any active
device name or drive designation may be given. Only device
name and drive name are relevant. File names are ignored.
Default is drive 2, master device (MCZ) , or drive 1, master
device (ZDS).
S=source device
Defines device from which files are copied. Any active
device name or drive designation may be given. Only device
name and drive name are relevant. File names are ignored.
Default is drive 0, master device.
- 94 -