Multi Operations - Pioneer VSX-D908TX Operating Instructions Manual

Multi Operations

Multi operations allow you to tell the receiver and your other components to do a number of things with the
push of just two buttons on the remote control. For example, you can program the unit to turn on your TV, turn
on your DVD player, go into a specific sound mode and start playing the loaded DVD. This feature allows you to
decide which operations you want performed as well as the order in which you want them performed.
The steps below show you how to program a string of up to 5 different operations based on eight possible
components. You do not need to program the power of this unit, or any PIONEER product, to go on, it/they will
do so automatically when the MULTI OPERATION function is used. Also, for some DVD players you will not
need to program a play command. Most DVDs will start to play automatically if their power goes on and a DVD
is loaded.
Be sure to recall or teach the remote control commands for each component before attempting
multi operations (see "Setting Up the Remote Control to Control Other Components," p. 54).
Î
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1 VCR2
MULTI CONTROL
MD/
CD TUNER TV CONT
TAPE1
CLASS MPX BAND DIRECT ACCESS
7 3 8
¶
- + - +
TUNING STATION
1 ¡ 4 ¢
- +
CHANNEL
1 2 3
5 6
4
8 9
7
0
+10 DISC
RF ATT DISPLAY
TV
TV VOL VOLUME
TV CONTROL
TV FUNC
EFFECT
MENU MUTE
/CH SEL
FUNCTION
ENTER
SIGNAL
SELECT
2/dts
SYSTEM
THX ADVANCED STANDARD
SETUP
2 MPEG
REMOTE
MIDNIGHT DSP STEREO
SETUP
DIGITAL NR
AV PREPROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
VSX-D938TX
1
Turn on your TV and the receiver.
1
Make sure your TV is set to the appropriate video input (for
example, VIDEO 1).
3,4
2
Press REMOTE SETUP and
select the MULTI OPERATION SETUP mode.
2
The REMOTE SETUP menu appears on your TV screen. The MULTI
CONTROL and the SYSTEM OFF buttons start to blink.
To cancel MULTI OPERATION SETUP mode
Press REMOTE SETUP.
3
Press FUNCTION that you want to use to start the
MULTI OPERATION.
You can use any MULTI CONTROL button for this procedure. It
does not matter which one you choose but for example purposes
we will use the DVD/LD button.
This MULTI CONTROL button will be used when you want to recall
the MULTI OPERATION commands for use (see the next page:
"Performing multi operations").
Also, the SYSTEM OFF button will blink. See the next page for
instructions how to use the SYSTEM OFF button.
4
Press MULTI CONTROL for the component whose
operation you want to start MULTI OPERATIONS with
(for example, TV CONT button).
The selected button will light steadily.
• Each button can perform various preset multi operations (see
step 5 on the next page).
Using Other Functions
at the same time to
3
Multi-operation
1Select an item from the
Multi-Contorol buttons.
(ex. DVD)
2Select the operation
button. (ex. DVD = MENU)
3First command has been
learned.
4You can repeat this
proccess for 5 commands.
EXIT=Remote setup
69