Table of Contents
Advertisement
Maintenance (cont .ue)
qACKGUARD LIGHT
BACK PANEL LIGHT
LOWER OVEN LIGHT
.._ turn on backguard light, press and
(ChateauRange Only)
(ChateauRange Only)
hold "cooktop" rocker switch until light
On conventionalupper oven: Toturn on
To turn on oven light, press rocker
turns on. The switch is located on the
light, press button marked "BACK PAN- switch, locatedon manifoldpanel,to the
backguard.
EL" which is locatedat the base of the
"ON" position.
control panel.
To replacefluorescent surface light:
To replaceoven light: Beforereplacing
Disconnect power to range. Grasp the
On microwave oven model: To turn on
light bulb, DISCONNECT POWER TO
toptrim of backguardwith thumbs under light, press "ON" pad located at base of
RANGE. Be sure bulb is cool. Do not
front edge and pull outward while lifting
microwavecontrol panel,
touch a hot bulbwith a dampclothas the
to releasetrimfrom catchesat each end.
bulb may break. Usea dry potholderand
To replace fluorescent surface light:
carefully unscrewbulb cover and bulb.
Before replacing light, DISCONNECT
POWER TO RANGE. Besure bulb and
range parts are co°l- D° not t°uch a hot
_
__
0
bulb with a damp cloth as the bulb may
.....
break.
Removethree screwsholdingtrim piece
alongtop edge of glass OR two screws
holding trim piece along side edge of
Replace with a 40 watt appliance bulb
Remove bulb and replace with an 18 glass. Support glass while removing and bulb cover. Reconnect power to
watt fluorescent tube. Snap top trim screwsso glasswill not fall forward. Re-
range and reset clock.
backintoplace,restorepower,and reset
move bulb and replace. Restorepower,
clock,
check light operation prior to replacing
UPPER OVEN LIGHT
glass panel and reset clock.
(ChateauRange Only)
_VEN
LIGHT
On microwaveoven model, refer to the
On conventionaloven only: To turn on
oven light, push in button, located at
separatemicrowave oven use and care
base of controlpanel.
bookletfor instructionson removingthe
cooktop light bulb.
On microwaveoven:Oven lightturns on
whenever the door is opened or when
Before replacing oven light bulb, DIS-
the oven is in a cook or defrost opera-
CONNECT POWER TO RANGE. Be
tion.
sure bulb and range parts are cool. Do
not toucha hot bulbwitha dampclothas
To replace conventional oven light:
the bulb may break.
Before replacing light bulb, DISCON-
NECT POWER TO RANGE. Be sure
To replace oven light: Use a dry pot
bulb is cool. Use a dry potholder and
holder, to prevent possible harm to
very carefullyremovebulb. Replacewith
hands;and very carefully unscrewbulb
a 40 watt APPLIANCEbulb. Reconnect
cover and bulb. Replacewith a 40-watt
APPLIANCE bulb. Replace bulb cover,
powerto the range and reset clock.
Reconnectpowerto the rangeand reset
On microwaveoven model:Referto the
clock,
separate microwave oven use and care
bookletfor instructionson removingthe
_
_
_____
oven light bulb.
17
Advertisement
Table of Contents
Need help?
Do you have a question about the 7458XRA and is the answer not in the manual?