Aztech DSL5029EN(1T1R) User Manual page 24

User Manual
 WPS
Choose WLAN > WPS and the following page appears.
There are two ways for the wireless client to establish the connection with the
modem through WPS. The modem generates PIN, see the above figure. Click
Regenerate PIN to generate a new PIN, and then click Start PBC. In the
wireless client tool, enter the PIN which is generated by the modem, start
connection. The client will automatically establish the connection with the
modem through the encryption mode, and you need not to enter the key.
The other way is the wireless client generates PIN. In the above figure, enter
PIN of the wireless client in the Client PIN Number field, then click Start PIN to
establish the connection.
Note: The wireless client establishes the connection with the modem through
WPS negotiation. The wireless client must support WPS.
Page 24 of 42