Nat; Port Forwarding - Aztech DSL5029EN(1T1R) User Manual

User Manual
The following table describes the parameters and buttons of this page.
FIELD DESCRIPTION
Enable Select to use static IP routes.
Destination Enter the IP address of the destination device.
Subnet Mask Enter the subnet mask of the destination device.
Enter the IP address of the next hop in the IP route to the destination
Next Hop
device.
Metric The metric cost for the destination.
Interface The interface for the specified route.
Add Route Click it to add the new static route to the Static Route Table.
Select a row in the Static Route Table and modify the parameters. Then
Update
click it to save the settings temporarily.
Delete Selected Select a row in the Static Route Table and click it to delete the row.
Show Routes Click to display the IP Route Table.

NAT

 Port Forwarding
Click Advanced > NAT > Port Forwarding in the left pane, and the following
page appears.
Port forwarding allows you to configure virtual server so others can access the
server through the Gateway.
Page 26 of 42