Hitachi C 10FSHC Safety And Instruction Manual page 38

English
Lower guard
Cover plate
8 mm bolt
Fig. 44-c
WARNING:
CAUTION:
2. Mounting the saw blade
WARNING:
(1) Select a 255 mm blade, making sure the rotation arrow on the blade matches the
clockwise rotation arrow on the lower guard, and the blade teeth are pointing downward.
(2) Place the blade, washer (B) against the blade. Thread the 8 mm bolt in a
counterclockwise direction.
38
Cover plate
screw
Washer (B)
8 mm bolt
Fig. 44-a
Washer (B)
Blade end
spanner
When mounting the saw blade, confi rm that the rotation indicator
mark on the saw blade and the rotation direction of the lower
guard (see Fig. 1) are properly matched.
* Confi rm that the spindle lock has returned to the retract position
after installing or removing the saw blade.
* Tighten the 8 mm bolt so it does not come loose during operation.
Confi rm the 8 mm bolt has been properly tightened before the
power tool is started.
Unplug the mitre saw before changing/installing the blade.
Spindle lock
Blade
Washer (B)
8 mm bolt
Fig. 44-b
Washer (A)
Fig. 44-d