Table of Contents
Advertisement
1) Preface
Thank you for choosing RFM-DACNF01-P500MH FMC board.
This manual describes the features and specifications of the RFM-DACNF01-P500MH FMC board.
Read and understand the contents of this manual before operating this board.
K.K.Rocky reserves the right to revise this document and to make changes without notice.
2) Safety Instructions
Always read the safety instructions carefully.
● If smoke or an abnormal odor is detected from the FMC board, power off and
stop using the FMC board.
Continuous use of FMC board under these conditions might cause fire or permanent
damage to the system. Contact K.K.Rocky to test and repair.
● Do not attempt to disassemble and modify this board.
Disassembly and modification could cause fire or electric shock.
Please contact K.K.Rocky for any repair and test service.
● Never allow any liquids to spill on the FMC board, and never expose FMC board
to water or moisture.
Exposure to liquid or moisture could cause electric shock or fire.
● Avoid excessive vibration and any impact or shock to the FMC board.
Neglect could result in any damage on the board.
● Avoid handling the FMC board while it is powered. Only handle by the edges to
minimize the risk of electrostatic discharge damage.
● if the FMC board has been dropped and damaged, stop using the board and
contact K.K.Rocky to repair.
● Never place the board where it will be exposed to excess heat, such as in direct
sunlight, or near heater.
RFM-DACNF01-P500MH
Cautions
－ ⅰ －
Hardware Reference Manual
ver.10
Advertisement
Table of Contents
