Before You Start
Mark
Meaning
Indicates the number of audio sys-
2
tems.
Indicates the number of subtitle lan-
2
guages.
Indicates the number of viewing an-
3
gles.
Indicates the picture size (aspect ratio:
16 : 9 LB
screen width-to-height ratio) type.
1
Indicates the number of the region
where playback is possible.
ALL
When an operation is prohibited
When you are watching a DVD and attempt to
perform an operation, it may not be performed
because of the programming on the disc.
When this happens, the icon
the screen.
! The icon
may not appear with certain
discs.
Resetting the microprocessor
Pressing RESET lets you reset the micropro-
cessor to its initial settings.
The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time
after installation
! If the unit fails to operate properly
! When strange or incorrect messages ap-
pear on the display
1
Turn the ignition switch OFF.
2
pointed instrument.
RESET button
! When using with navigation unit or AVG-
! After completing connections or when you
appears on
About the demo mode
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
Press RESET with a pen tip or other
Notes
VDP1, if you press RESET, be sure ACC OFF is
selected. If ACC ON is selected, correct opera-
tion may not be possible even if you press
RESET.
want to erase all memorized settings or return
the unit to its initial (factory) settings, switch
your engine ON or set the ignition switch to
ACC ON before pressing RESET.
Important
Section
02
13
En