Switching The Xm Display; Storing And Recalling Broadcast Stations; Switching The Xm Channel Select Mode; Selecting A Channel Directly - Pioneer AVH-P6800DVD Operation Manual

Section
13 XM tuner (GEX-P910XM)

Switching the XM display

% Touch DISP to switch the XM display.
Each time you touch DISP changes the XM
display in the following order:
Channel name—Artist name/feature—Song/
program title—Additional information—Chan-
nel number
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P1—P6 you can easily store up to six broad-
cast stations for later recall with the touch of a
key.
% When you find a station that you want
to store in memory touch and hold a preset
tuning key P1—P6 until the XM preset
number stops flashing.
The number you have touched will flash in the
XM preset number indicator and then remain
lit. The selected station has been stored in
memory.
The next time you touch the same preset tun-
ing key P1—P6 the station is recalled from
memory.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P1—P6 are not displayed, you can dis-
play them by touching d.
Notes
! Up to 18 stations, six for each of three XM
bands can be stored in memory.
! You can also use a and b to recall stations
assigned to preset tuning keys P1—P6.
58
En
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
% Touch MODE to select the desired chan-
nel select mode.
Touch MODE repeatedly to switch between
the following channel select modes:
CH NUMBER (channel number select setting)
—CATEGORY (channel category select
setting)
Selecting a channel in the
channel category
1 Touch MODE to select the channel cate-
gory select mode.
CATEGORY appears on the information bar.
2 Touch a or b to select the desired chan-
nel category.
3 Touch c or d to select the desired chan-
nel in the selected channel category.

Selecting a channel directly

Refer to Selecting a channel directly on page
55.

Displaying the Radio ID

Refer to Displaying the Radio ID on page 56.