Section
15
TV tuner
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P01—P12 you can easily store up to 12 broad-
cast stations for later recall with the touch of a
key.
% When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01—P12 until the pre-
set number stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
# To switch between P01–P06 and P07–P12,
touch
or .
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P01–P06 and P07–P12 are not dis-
played, you can display them by touching LIST.
Notes
! Up to 24 stations, 12 for each of two TV bands,
can be stored in memory.
! You can also use a and b to recall stations
assigned to preset tuning keys P01—P12.
66
En
Introduction of advanced
TV tuner operation
1
1 Function display
Shows the function names.
1
Touch AUDIO MENU to display MENU.
MENU appears on the display.
# You can also display MENU by clicking the
joystick on the remote control.
2
Touch FUNCTION to display the func-
tion names.
The function names are displayed and oper-
able ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the TV picture, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the TV picture.