When An Operation Is Prohibited; Resetting The Microprocessor; Feature Demo Mode - Pioneer Super Tuner IIID AVH-P4100DVD Operation Manual

Section
02 Before You Start
When an operation is
prohibited
When you are watching a DVD and attempt to
perform an operation, it may not be performed
because of the programming on the disc.
When this happens, the icon
the screen.
! The icon
may not appear with certain
discs.

Resetting the microprocessor

Pressing RESET lets you reset the micropro-
cessor to its initial settings without changing
the bookmark information.
The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time
after installation
! If the unit fails to operate properly
! When strange or incorrect messages ap-
pear on the display
1 Turn the ignition switch OFF.
2 Press RESET with a pen tip or other
pointed instrument.
RESET button
Note
After completing connections or when you want
to erase all memorized settings or return the unit
to its initial (factory) settings, switch your engine
ON or set the ignition switch to ACC ON before
pressing RESET.
10
En

Feature demo mode

The feature demo automatically starts when
you select the source Off. The demo continues
while the ignition switch is set to ACC or ON.
To cancel the feature demo, press and hold
MUTE. To restart the feature demo, press and
appears on
hold MUTE again. Remember that if the fea-
ture demo continues operating when the car
engine is turned off, it may drain battery
power.
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
Important