When An Operation Is Prohibited; Indicators Meanings; For Viewing Lcd Comfortably; Changing The Wide Screen Size - Pioneer Super Tuner IIID AVH-P4000DVD Operation Manual

Before You Start

For viewing LCD comfortably

Due to its construction, the viewing angle of
the LCD screen is limited. You can adjust it by
changing either screen size or picture adjust-
ment.

Changing the wide screen size

By changing the screen size from 4:3 to 16:9,
you can adjust the screen so that the screen
can fit to the video image you are playing.
For details concerning operation, refer to
Changing the wide screen mode on page 41.

Changing the picture adjustment

You can make the best adjustment to the pic-
ture display by changing BRIGHTNESS,
CONTRAST, COLOR and HUE. You can also
dim or enlight the overall picture image using
DIMMER.
For details concerning operation, refer to
Changing the picture adjustment on page
41.
What the marks on DVDs
indicate
The marks below may be found on DVD disc
labels and packages. They indicate the type of
images and audio recorded on the disc, and
the functions you can use.
Mark Meaning
Indicates the number of audio sys-
2
tems.
Indicates the number of subtitle lan-
2
guages.
Indicates the number of viewing an-
3
gles.
Indicates the picture size (aspect ratio:
16 : 9 LB
screen width-to-height ratio) type.
1
Indicates the number of the region
where playback is possible.
ALL

When an operation is prohibited

When you are watching a DVD and attempt to
perform an operation, it may not be performed
because of the programming on the disc.
When this happens, the icon
the screen.
! The icon
may not appear with certain
discs.

Resetting the microprocessor

Pressing RESET lets you reset the micropro-
cessor to its initial settings without changing
the bookmark information.
The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time
after installation
! If the unit fails to operate properly
! When strange or incorrect messages ap-
pear on the display
1 Turn the ignition switch OFF.
2 Press RESET with a pen tip or other
pointed instrument.
RESET button
Note
After completing connections or when you want
to erase all memorized settings or return the unit
to its initial (factory) settings, switch your engine
ON or set the ignition switch to ACC ON before
pressing RESET.
Section
02
appears on
13
En