Thames & Kosmos AIR Plus Water Power Experiment Manual page 40

AIR+WATER power |
Forklift
Assembly Notes
1. Unscrew the original cap of the pressurized air+water
tank before starting the assembly. The original cap will
not be used in this model.
2. The gears should meshed well with each other in order
to operate smoothly.
3. Leave a 1 mm gap between the axle lock and the long
frame so that the wheel can turn smoothly.
4. Note that the sprockets must be aligned so that the
chain can operate smoothly.
5. Cut Tube A to get tubes of the following lengths for
this model.
Tube A : 9.5 cm x 1, 30 cm x 1, 44 cm x 1
1 2
5
8
MODEL 13 Forklift
Parts Needed
x 1
x 1 x 1
x 2
x 1
x 3
x 2
3
6
9
38
x 1
x 2 x 1
x 1
x 2 x 2
x 1
x 2
x 2
x 2
x 4 x 4
x 2
x 2
x20
x 1
x 2
x 1
1
3
4
7
10
x 1
x 1
x 2
x 2
x 1
x 1
x45
x 5
2
4
5
Tube A