Installing/Removing Power Modules - Siemens RUGGEDCOM RX1510 Installation Manual

Chapter 3
Modules
Figure 15: Installing a Module
1. Module 2. Chassis 3. Screw
5. Tighten the screws to secure the module.
6. [Optional] If necessary, install the device in the rack.
7. Connect power to the device.
Section 3.3

Installing/Removing Power Modules

The RUGGEDCOM RX1510 supports dual redundant power supply modules.
Figure 16: Power Modules
1. Slot PS1 2. Slot PS2
28
1
2
3
1 2
Installing/Removing Power Modules
RUGGEDCOM RX1510
Installation Guide