JVC HX-Z9 Service Manual page 15

3.2.4 Removing the button board
(See Fig.31~35)
• Prior to performing the following procedure, remove the dis-
play system control board.
(1) Pull out preset knob, sound mode knob on the front panel
toward the front.
(2) Pull out the volume knob and remove the two screws V at-
taching the knob holder. Remove the nut from the front
panel.
(3) Remove the four screws W attaching the stay bracket (2).
(4) Remove the eight screws X attaching the button board.
Sound mode knob
Preset knob
Knob holder
Front panel assembly
Volume knob
Fig.31
V
Fig.32
Nut
Fig.33
Stay bracket (2)
Fig.34
X
Button board
X
Fig.35
W
X
(No.22066)1-15