JVC HX-Z9 Service Manual page 13

3.1.9 Removing the power transformer assembly
(See Fig.26, 27)
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly, the rear panel,
the main board and the bridge board / regulator board.
(1) Remove the screw O attaching the primary board.
(2) Disconnect the wire from connector CN231 and CN232 on
the primary board.
(3) Remove the four screws P attaching the power transform-
er assembly.
(4) Detach the cord stopper from the base chassis upward.
REFERENCE:
When disconnecting the power cord from connector CN250 on
the primary board, remove the fixing band.
Power transformer assembly
O
Fig.26
Power transformer
Primary board
assembly
CN231,CN232
P
Fig.27
Primary board
CN250
Band
Cord stopper
P
(No.22066)1-13